Appendix H Setting Scanner Parameters; Introduction; Enabling And Disabling Symbologies; C Api - Motorola MK1250-0N0DAKBNTWR - Symbol Micro Kiosk MK 1250 Product Reference Manual

Appendix H Setting Scanner Parameters

Introduction

This chapter describes the scanning default parameters for the MK1200, useful when developing applications that
control the MK1200 scan engine.

Enabling and Disabling Symbologies

See the following for information on where to find programming examples for enabling and disabling symbologies.

C API

Refer to the file scan.c in Samples\ EVC\Standard\Common in the SMDK for C. See the functions
ScanEnableDecoder and ScanDisableDecoder, which enable and disable a single symbology using the scanner
C API functions.

ActiveX API (Browser Applications)

Refer to the file scanframe.html in the Web Kiosk Software Suite. See the subroutine SetLaserMode which
enables and disables symbologies based on whether 2D scanning is enabled.

Default Table

Table H-1 lists the default values for the MK1200 SE 3223 Scan Engine. If desired, change these values within an
application, and in the case of HTML (browser) applications, set them independently for each web page.
To change the settings in an application, refer to the MK1200 SMDK for C. See the scanparams sample application
in the SMDK.
For a sample HTML application that includes source code and demonstrates scan engine control, see
Web Kiosk Software Suite.
Chapter 6,