1 - 6
DS6708 Digital Scanner Product Reference Guide
Configuring the Digital Scanner
To configure the digital scanner, use the bar codes included in this manual, or the 123Scan
program.
See
Chapter 4, User Preferences & Miscellaneous Digital Scanner Options
Preferences
for information about programming the digital scanner using bar code menus. Also see each
host-specific chapter to set up connection to a specific host type.
See
Chapter 12, 123Scan2
includes a help file.
Mounting the Digital Scanner
Desk Mount
Use the optional desk mount for convenient and protective placement of the digital scanner on a flat surface.
Simply place the mount on the surface. The rubber feet hold the mount securely in place when inserting and
removing the digital scanner.
Inserting the Digital Scanner in the Desk Mount
Figure 1-7
You can secure the desk mount to a desk surface by inserting two screws* appropriate for the mounting
surface through the screw holes of the desk mount, and into the surface. Screw the desk mount onto the
surface with or without the rubber feet.
*The recommended screws are two #6 screws (5/8" long).
to configure the digital scanner using this configuration program. The program
2
configuration
and
Chapter 5, Decoding