5 - 2
MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Connecting the MK1200 to the Host Computer
See the following instructions to configure ActiveSync for Guest access, suitable for copying files between the host
computer and the MK1200.
Connect the RJ-45 connector end of the ActiveSync Developer's Cable, p/n 25-64626-01R, to the Debug port
1.
on the MK1200 (see
computer.
If the
2.
Get Connected
.
ActiveSync
Get Connected Window
Figure 5-1
Select Next. The host computer and the MK1200 attempt to synchronize. The
3.
appears.
New Partnership Window
Figure 5-2
As
4.
Partnership
Figure 1-3 on page
1-5). Connect the other end of the cable to a USB port on the host
window does not appear on the host computer, select
is not supported, click No, then Next. The
Start > Programs > Microsoft
New Partnership
New Partnership/Name Your Device
window
window appears.