When the command file upgrade begins, the following message displays.
9.
Downloading:
Via PC Card PC_MK1200_XXX.mcf
Obtaining script file from given transport . . .
################### 100%
Begin script execution
-----------------------------------------------------------
Partition Table
################### 100%
Download complete
in 0.656 seconds
(12487 bytes/second)
----------------------------------------------------------------
Splash Screen
################### 100%
Download complete
in 3.257 seconds
(94131 bytes/second)
----------------------------------------------------------------
Platform
################### 100%
Download complete
in 14.337 seconds
(365000 bytes/second)
----------------------------------------------------------------
Application
################### 100%
Download complete
in 39.38 seconds
(718000 bytes/second)
----------------------------------------------------------------
################### 100%Your terminal needs to be rebooted.
Please press button A to reboot.
Command File Upgrade, Downloading Message
Figure F-14
NOTE If an error screen displays, remove power from the MK1200 and restore power to reboot the device. Hold
the A button during the reboot. The IPL main menu displays. Repeat the Command File upgrade
procedure.
Press and release button A to perform a warm boot. When the desktop displays, remove power from the
10.
MK1200. Remove PC card and replace the PCMCIA access covers (see
Command File
OS Upgrade Procedures
Figure 1-2 on page
1-4).
F - 9