Debug
(Port enabled on wired
(ActiveSync Port)
Ethernet configurations only)
ETHERNET/
ETHERNET/
BIAS-T
BIAS-T
MK1200 Bottom (Connectors) View
Figure 1-3
External Ports
The MK1200 has the following external ports:
•
Ethernet / Bias-T (Power-Over-Ethernet)*
•
Power
•
Printer (RS-232).
*Functional on wired Ethernet MK1200 configurations only, not on MK1250 RF units.
Ethernet/Bias-T
Wired Ethernet: Power via AC Outlet
The Ethernet / Bias-T (10-conductor RJ-45) port accommodates Ethernet data connection. The MK1200 receives
power via the Symbol approved power supply.
Wired Ethernet: Power via Power-Over-Ethernet
The MK1200 supports Power-Over-Ethernet (POE), Symbol Technologies' proprietary Bias-T functionality. An
Ethernet (10 Base-T) cable connected to the Ethernet/Bias-T port provides both data communication and power to
the MK1200.
Power Port
A Symbol power supply connects to the power port (2.0 mm barrel jack connector) on the MK1200. For more
information, see
Connecting the MK1200 on page 2-7
Ethernet/Bias-T*
Power
12-24
12-24
VDC
VDC
Printer
(RS-232)
PRINTER
PRINTER
and
Technical Specifications on page
MK1200 Introduction
1 - 5
A-1.