SE4400 Integration Guide
Mounting
There are two mounting holes (M1.6x0.35) and two locator holes on the bottom of the
chassis (see
Figure
2-1). The SE4400 can be mounted in any orientation without
degradation in performance.
Note: Mounting the SE4400 in a non-upright position results in images
rotated accordingly in snapshot or video mode.
When installing the mounting screws, ensure they do not protrude past the mounting hole
threads in the chassis; use 2.4 mm maximum mounting screw thread engagement.
Recommended mounting screw torque is 1.25 ±0.25 in-lb.
2-2