Ethernet / Bias-T Port Connections
The Ethernet connector provides both Ethernet signals and power supply voltage to the MK1200 through a single
Ethernet cable. If providing power to the MK1200 via POE, DO NOT use the Symbol AC power supply.
Power-Over-Ethernet Connections
Table 2-2
Pin
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5*
Pin 6*
Pin 7
Pin 8*
Pin 9*
Pin 10
* Used only with Power-Over-Ethernet
Printer (RS-232) Port Connections
Use this connector pin-out (RJ-45 jack, 10 conductor) for serial communication with the host or connection to a
printer.
Printer (RS-232) Connector: 10-Pin
Table 2-3
Pin
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
Description
Reserved/Do not Use
TXD (+)
TXD (-)
RXD (+)
Bias-T VCC
Bias-T VCC
RXD (-)
Bias-T GND
Bias-T GND
Reserved/Do not Use
Description
Not used
Not used
RXD (input)
DSR (input)
RTS (output)
GND
CTS (input)
Not used
TXD (output)
DTR (output)
Installation 2 - 11