Motorola MK1250-0N0DAKBNTWR - Symbol Micro Kiosk MK 1250 Product Reference Manual page 38

2 - 8 MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Wired Ethernet: Power via POE
The POE installation option allows the MK1200 to communicate and receive power on the same 10 Base-T
Ethernet cable. See
CAUTION
Connect the Ethernet cable to the MK1200 Ethernet / Bias-T port. See
1.
Ensure the Ethernet cable is terminated according to
2.
Plug the other end of the Ethernet cable into the Bias-T (POE) module.
3.
Connect a patch cable from the Bias-T module to the host system's Ethernet port.
4.
Connect the DC power supply to the Bias-T module.
5.
Category 5
Patch Cable
Category 5
MK1200 Power-Over-Ethernet, Network Connectivity
Figure 2-6
Figure 1-6 on page 1-10
DO NOT use POE in conjunction with an external power supply connected to the power port on the
MK1200. Using two power sources can damage the MK1200 and/or the network.
Customer Switch / Hub
AP-PSBIAS-TR
Customer
Patch Panel
MK1200
MicroKiosk
and Figure 1-7 on page 1-10.
Table 2-2 on page
P/N 50-14001-006R
DC Power
Supply
DC Power
AP-PSBIAS-TR
Supply
P/N 50-14001-006R
Category 5
Figure 1-3 on page 1-5.
2-11.