Motorola MK1250-0N0DAKBNTWR - Symbol Micro Kiosk MK 1250 Product Reference Manual page 58

3 - 12 MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide
System Configuration Default Parameters (Continued)
Table 3-5
System Configuration
Parameters
Memory Allocation
SystemStorePercent
Network Time Update
Time Server
Refresh
Recovery Refresh
Threshold
Description
Memory Partition of Storage Memory and System Memory
Percentage of memory used for the
storage memory. The remaining memory
is allocated to program memory (memory
used to run programs). Half the unused
RAM is used, when the value assigned to
SystemStorePercent does not provide
enough memory for the device to operate
normally. This parameter only configures
unused RAM.
Configuration of Simple Network Time Protocol service (see
Time Update: SNTP Client on page 7-10
Specifies the domain name of the time
server to contact for updates. If no time
server is set in the field, the time service
is disabled.
Do not set an IP address for this
parameter.
If the MK1200 is unable to obtain a time
value from the time server, it uses the
default setting (June 1, 1999 12:00:00
PM), and does not re-attempt to acquire
a time value unless a regular update is
also configured (the next attempt occurs
at the configured time).
Specifies the time period, in milliseconds,
between synchronizations with the SNTP
server.
Specifies the time period, in milliseconds,
until next synchronization, if the previous
synchronization attempt failed.
Specifies the interval between the time
on the SNTP server and the current time
in milliseconds. If the difference between
the SNTP server time and the local
system time is larger than the specified
value in Threshold parameter, the update
is ignored unless the system clock is
presumed incorrect.
Default
50 (0x32 hex)
Network
for details)
tock.usno.navy.mil
1209600000 (0x48190800 hex)
86400000 (0x5265c00 hex)
86400000 (0x5265c00 hex)