Building The Image - Motorola MK1250-0N0DAKBNTWR - Symbol Micro Kiosk MK 1250 Product Reference Manual

Building the Image

Before building the image, TCM checks the script to verify that all files referenced in the script exist.
NOTE Performing a check is more important for existing scripts to ensure that files referenced in the script are
still in the designated locations.
To check a script:
In the Script Window, select the script.
1.
Save the script, if not already saved.
2.
From the
3. Script
OR
On the toolbar, choose
TCM verifies that files referenced in the script exist on available drives and lists an error message in the Errors
4.
found box for any missing files.
Click OK to exit.
5.
To build a script:
In the Script Window, select the script to be built.
1.
From the
2. Script
OR
On the toolbar, choose
Select the item to build. If an application is selected to build, specify the application.
3.
Select Compression for the hex image, which reduces the size of most hex images to speed downloading.
4.
Click OK.
TCM performs a check. If the script has no errors, TCM builds the partition which can be transferred using IPL
5.
to the MK1200 as a hex file.
If the build fails, TCM displays a message indicating which file(s) are missing.
If the amount of flash required by the script exceeds the image size, a TCM error results. To correct this, reduce the
number of files in the partition. See
image size.
menu, choose ,
Check
.
menu, select ,
Build
. The Configure Build window displays.
Defining Script Properties on page E-4
Terminal Configuration Manager
for more information on setting the
E - 7