Modifying An Existing Configuration File; Retrieving And Modifying A Configuration File From An Mk1200 - Motorola MK1250-0N0DAKBNTWR - Symbol Micro Kiosk MK 1250 Product Reference Manual

4 - 12 MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide

Modifying an Existing Configuration File

NOTE If you upgraded the MK1200 OS to CE .NET 4.2 and a configuration (.reg) file was created using an older
version, you must create a new .reg file using RDM Version 2.5 (see
page
To edit an existing configuration file:
From the RDM on the host computer, choose
1.
Configuration Utility
Select a configuration file (with a .reg extension) to edit and click OK.
2.
NOTE Only open files created by the RDM, System Menu, or Save Configuration. Loading other registry files
can cause file corruption.
Make the necessary changes to the default values in the configuration file. See
3.
3-6 for these options. Also see
MK1200 Configuration Utility
To save the changes, choose
4.
the file. Note that you cannot change the Domain (product) of an existing configuration file.

Retrieving and Modifying a Configuration File from an MK1200

From the
1. RDM
Select
2. Tools > Retrieve Remote Configuration File
the host computer. This launches the
unavailable in the device, RDM opens the
Make the necessary changes to the default values in the configuration file. See
3.
3-6 for these options. Also see
MK1200 Configuration Utility
In the
4. MK1200 Configuration Utility
transfer the updated configuration file back to the original MK1200.
Alternatively, configure the RDM to automatically cold boot the MK1200 device after a download completes.
5.
Select
Tools >Options
NOTE To reboot manually instead, in the RDM, select the MK1200 device, then select Actions > Cold Boot.
Allow approximately one minute for the MK1200 to reboot and reconnect, then select View > Refresh to
verify the device rebooted successfully.
more information about upgrades, see
4-11). For
window.
Figure 4-7
window data entry field types used when changing configuration options.
to overwrite the old file, or select
File > Save
screen, select the device from which to retrieve the configuration file.
MK1200 Configuration Utility
Figure 4-7
window data entry field types used when changing configuration options.
window, select
to open the
RDM Options
Appendix F, OS Upgrade
Tools > Open Local Configuration File
for a sample screen, and Data Entry Formats on page 4-27
to retrieve the MK1200 configuration file from the MK1200 to
window of the RDM. If a configuration file is
MK1200 Configuration Utility
for a sample screen, and Data Entry Formats on page 4-27
File > Save to Remote Device
screen, and check
Auto reboot after download
Creating a Configuration File on
Procedures.
to open the
MK1200
Default Parameters on page
to specify a new name for
Save As
window with the default factory settings.
Default Parameters on page
to save the changes and
.
.
for
for