Category 5
Alternate MK1200 Power-Over-Ethernet, Network Connectivity
Figure 2-7
Wired RS-232 Connection
The MK1200 can communicate with a host using a serial cable connected to the Printer (RS-232) port.
Insert the power supply's barrel connector into the MK12000's power port. See
1.
Route the power cable.
2.
Plug the Symbol AC power supply into a wall outlet.
3.
Connect the RS-232 serial cable to the Printer (RS-232) port on the MK1200. See
4.
port locations. Ensure the cable is terminated according to the
described in
Table 2-3 on page
Plug the other end of the serial cable into the host.
5.
Customer Switch / Hub
(Main Computer Room / MDF)
Fiber Optic
Cable
Customer
Patch Panel
(Remote Computer
Room / IDF)
AP-PSBIAS-TR
AP-PSBIAS-TR
MK1200
MicroKiosk
2-11.
P/N 50-14001-006R
DC Power
Supply
DC Power
Supply
P/N 50-14001-006R
Figure 1-3 on page
Figure 1-3 on page 1-5
Printer (RS-232) Port Connections
Installation
2 - 9
1-5.
for
pin-outs