Motorola MK1250-0N0DAKBNTWR - Symbol Micro Kiosk MK 1250 Product Reference Manual page 154

B - 4 MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide
When the menu opens, select
Menu Item
Status
WLAN Profiles
Find WLANs
Options
,
Status WLAN Profiles
Displays the current status and information for the wireless connection.
tab - displays radio signal transmission strength from the adapter (using its current
Signal
profile) to the associated AP.
tab - displays software, driver, firmware, hardware, and country information for the
Info
current profile.
tab view - displays network address information.
IP Status
tab - displays signal strength data and data rate, and performs data transmission
Ping
tests between the MK1250 and associated AP or client.
tab - displays APs with the same ESSID as the current MK1250 profile. Set the
APs
MK1250 roaming capabilities.
Lists the current profiles and allows adding, editing, and deleting profiles.
Only the Default profile is maintained in mkconfig.reg. Perform all configuration with the
Default profile only. Do not create additional profiles. These are not saved through a cold
boot cycle. Under Edit, the
ESSID, security settings, network address information, and power consumption level for
that profile. See page B-6.
Displays a list of Spectrum24 networks (APs and networked peers) available to the
MK1250 for association. The networks are listed by ESSID. Tap a network and tap
Connect to interoperate with the AP representing that network. See
page B-13 for more information.
Displays settings for configuring system sounds, AP and MK1250 association
capabilities, profile roaming options, and the password protecting the Mobile Companion
utility.
, , or
Find WLANs Options
Description
, ,
Mode Encryption IP Config
.
, and tabs show the
Power
Find WLANs on