Motorola MK1250-0N0DAKBNTWR - Symbol Micro Kiosk MK 1250 Product Reference Manual page 43

Remove the three screws shown in
2.
Retain only the screw from the protective cover. Two new (longer) screws are provided with the MSR.
Remove
Screws
(3)
Removing the Cover and Screws
Figure 2-10
CAUTION When removing an access cover, follow proper ESD (Electro-Static Discharge) precautions to avoid
damaging sensitive components. These precautions include, but are not limited to, working on an
ESD mat and ensuring that the operator is properly grounded. Failure to apply proper ESD
precautions can damage the MK1200 and void the warranty.
Connect the MSR cable to the MK1200.
3.
Connect
Cable
Connecting the MSR Cable to the MK1200
Figure 2-11
Figure 2-10 from the back of the MK1200 and remove the protective cover.
Protective
Cover
Installation 2 - 13