Se4710 Integration Guide; Mounting - Motorola SE4710 Integration Manual

2 - 6

SE4710 Integration Guide

Mounting

There are several mounting holes (M1.4x0.3) and locator holes on both the top and bottom of the chassis (see
Figure 2-4). The SE4710 can be mounted in any orientation without degradation in performance.
When installing the mounting screws, ensure they do not protrude past the mounting hole threads in the chassis;
use 2.1 mm maximum mounting screw thread engagement. Recommended mounting screw torque is 0.7 ±0.1
in-lbf (8.0 ± 1.0 cm-N).
SE4710 Mounting Diagram
Figure 2-4
Notes
•
Unless otherwise specified:
•
Engine has two mounting surfaces with
mirrored locating and mounting features,
and can be secured to either surface.
•
Holes marked "A" or "B" are engine
locating aides.
Holes marked "C" are threaded mounting
holes.
•
This is a reference drawing and is not
intended to specify, or guarantee all
possible integration requirements for this
engine.
•
All dimensions are in mm. All untoleranced
dimensions follow a general tolerance of
+/- 0.15 mm.