Editing Fields Using Coordinates - SICK microScan3 EtherNet/IP Operating Instructions Manual

7.10.6

Editing fields using coordinates

8020200/15ZT/2019-11-14 | SICK
Subject to change without notice
Display Reference Contour Field
You determine whether the reference contour field is displayed.
Drawing area
You can use a Cartesian or a polar coordinates system and select the colors for the grid
and the drawing area.
Choose the option Cartesian.
b
✓
The coordinates system is shown as a Cartesian coordinates system.
Choose the option Polar.
b
✓
The coordinates system is shown as a polar coordinates system.
Select Color of grid.
b
✓
The field editor's grid is displayed in the chosen color.
Select Color of drawing area.
b
✓
The field editor's drawing area is displayed in the chosen color.
You can use coordinates to edit fields. Depending on the form on which a field is based,
the appropriate input fields are displayed. The example shows a dialog box for a rectan‐
gle.
CONFIGURATION
O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™
7
105