Download Print this page

Digital Control DIGITRAK FALCON F1 SINGLEBAND User Manual page 55

Dci digiguide

Advertisement

DIGITRAK FALCON F1 SINGLEBAND
USER MANUAL
DCI DigiGuide
05.18.2024
V2 TRANSMITTERS MULTIPOWER MODE INTRODUCTION
When used with Falcon F1 locators, V2 transmitters have two power modes
(Standard and Low) to balance signal strength and battery life.
V2 transmitters are etched with a "V2" on the stainless battery compartment
(not on the label) and have a multipower mode sticker around the IR port.
If used with a Falcon locator without the programmable power mode, the
mode selected while pairing the Tx determines the signal range and the
battery life.
Falcon locators with programmable power mode override any other selection
method when used with a V2 transmitter.
Model Numbers: Modellnummern
Power Mode: Power-Modus
DCI SuperCell: DCI SuperCell
LiR w/FTA: LiR mit FTA
Alkaline: Alkalisch
Li CR 123: Li CR 123
Depth: Tiefe
Data Range: Datenreichweite
55
DIGITAL CONTROL, INC

Advertisement

loading
Need help?

Need help?

Do you have a question about the DIGITRAK FALCON F1 SINGLEBAND and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Digitrak falcon f1