Target Steering - Digital Control DIGITRAK FALCON F1 SINGLEBAND User Manual

Target Steering is typically only used on a straight drill path under level
ground, not a curved path, with terrain changes, or to correct a significantly
off-course bore.
The maximum distance the locator can be placed ahead of the drill head for
accurate up/down Target Steering is 35 ft (10.7 m).
Within this range, starting with the drill head approximately level, the
maximum depth and pitch changes are approximately 4 ft (1.2 m) and 14%,
respectively.
Beyond this distance, depth information becomes less accurate.
Data and left / right steering are usable for the entire range of the
transmitter.
Target Steering assumes that the locator is on the ground or at
the height set with a TrakStand with HAG enabled. The locator
ignores the handheld Height-Above-Ground (HAG) setting.
The Falcon Compact display does not support Target Steering.

TARGET STEERING

STEP 1 OF 5
From the Main menu, select
Target Steering.
The screens in this process times out after 7 seconds of no
trigger action.
DIGITAL CONTROL, INC
DIGITRAK FALCON F1 SINGLEBAND USER MANUAL
DCI DigiGuide 05.18.2024
50