STEP 7 OF 8
Select Transmitter pairing
request.
Do not move the transmitter until you hear four beeps and a
check mark appears.
STEP 8 OF 8
Confirm the pairing and power mode, and then click to continue to
Calibration.
ADVANCED FO - SCAN
STEP 1 OF 7
Before You Start
Scan Pick Pair allows you to scan the bore path for noise before optimizing
band 11 and pairing.
STEP 2 OF 7
Ensure all transmitters are powered off or more than 100 ft (30.5 m) away
from the locator.
STEP 3 OF 7
From the Main Menu, select
Transmitter selection.
DIGITAL CONTROL, INC
DIGITRAK FALCON F1 SINGLEBAND
USER MANUAL
DCI DigiGuide
05.18.2024
25
Need help?
Do you have a question about the DIGITRAK FALCON F1 SINGLEBAND and is the answer not in the manual?