After a successful
calibration, the locator
beeps four times and
displays a checkmark.
If the calibration fails, the locator beeps two long beeps and
displays an X.
STEP 6 OF 8
Use the Above Ground Range (AGR) that displays next to check the accuracy
of your calibration. Move the locator to at least two different distances 5 ft
and 15 ft (1.5m and 4.6m) and verify distance readings match the
measurement.
DIGITAL CONTROL, INC
DIGITRAK FALCON F1 SINGLEBAND
USER MANUAL
DCI DigiGuide
05.18.2024
31
Need help?
Do you have a question about the DIGITRAK FALCON F1 SINGLEBAND and is the answer not in the manual?