Digital Control DIGITRAK FALCON F1 SINGLEBAND User Manual page 26

DIGITRAK FALCON F1 SINGLEBAND USER MANUAL
DCI DigiGuide 05.18.2024
STEP 4 OF 7
Select Frequency
optimization.
STEP 5 OF 7
Select Scan.
STEP 6 OF 7
After the Band 11 bar appears on the right and the other bars disappear,
walk your intended path. Compare the saved band on the far left to the
optimized band on the right and their high point markers. Pay special
attention to the deeper parts of the bore. Consider rescanning the location if
the noise is high.
Higher bars and markers indicate more noise.
STEP 7 OF 7
Return to the point of most noise and select to rescan.
This gives you the best frequencies for this location.
To continue using the currently paired band, select Cancel.
26
DIGITAL CONTROL, INC