Target Steering assumes that the locator is on the ground, even
if standard HAG is enabled. If TrakStand HAG is enabled, the
height set for the Trakstand is adjusted for Target Steering.
STEP 5 OF 5
Use the keypad to enter the
value you measured and
select Enter. HAG is now on.
When standard HAG is enabled, the locator must be held at the set height for
accurate depth readings.
HAG must be turned on manually each time after the locator is
powered on or calibrated.
Target Steering does not adjust depth for standard HAG and
assumes the locator is on the ground. If TrakStand HAG is
enabled, the locator adjusts for the TrakStand height.
DIGITAL CONTROL, INC
DIGITRAK FALCON F1 SINGLEBAND
USER MANUAL
DCI DigiGuide
05.18.2024
20
Need help?
Do you have a question about the DIGITRAK FALCON F1 SINGLEBAND and is the answer not in the manual?