To change the transmitter
power mode, select
Transmitter Power. Select
the Band, and then click to
cycle between the Standard
and Low power modes. Hold
and release to select the
new power mode.
STEP 5 OF 7
Align the transmitter so its IR port is near and facing the round IR port on the
front of the locator.
The Falcon locators with programmable power mode ignore the
V2 Power Mode selection method described on the transmitter
sticker and use the locator-specified power level.
STEP 6 OF 7
Select Transmitter pairing
request.
DIGITAL CONTROL, INC
DIGITRAK FALCON F1 SINGLEBAND
USER MANUAL
DCI DigiGuide
05.18.2024
28
Need help?
Do you have a question about the DIGITRAK FALCON F1 SINGLEBAND and is the answer not in the manual?