Digital Control DIGITRAK FALCON F1 SINGLEBAND User Manual page 36

STEP 4 OF 11
Find the Front Locate Point (FLP)
Walk forward. As you pass the transmitter, the ball jumps to the top of the
screen. You are now tracking the Front Locate Point (FLP).
The signal strength increases as you move toward the
transmitter and decreases as you move away from it. If the
signal strength is flashing, this indicates extreme interference.
An A near the roll indicator indicates signal Attenuation is in
effect. If the depth is less than 8ft (2.4m) you can ignore this
warning. For more information, search the DigiGuide for
"attenuation."
STEP 5 OF 11
Move the locator to put the ball in the box.
The locator can face toward or away from the drill as long as it is parallel to
the direction of drilling.
Mark this position on the ground as the Front Locate Point (FLP).
DIGITAL CONTROL, INC
DIGITRAK FALCON F1 SINGLEBAND USER MANUAL
DCI DigiGuide 05.18.2024
36