Digital Control DIGITRAK FALCON F1 SINGLEBAND User Manual page 24

To change the pre-set power level, click the Quick Scan/Pair
option (the gear icon).
STEP 5 OF 8
Insert batter(ies) positive terminal first and install the battery cap to power on
the transmitter.
STEP 6 OF 8
Align the transmitter so its IR port is near and facing the round IR port on the
front of the locator.
Falcon locators with programmable power mode override any
other selection method when used with a V2 transmitter.
DIGITAL CONTROL, INC
DIGITRAK FALCON F1 SINGLEBAND USER MANUAL
DCI DigiGuide 05.18.2024
24