Digital Control DIGITRAK FALCON F1 SINGLEBAND User Manual page 22

DIGITRAK FALCON F1 SINGLEBAND USER MANUAL
DCI DigiGuide 05.18.2024
STEP 3 OF 5
Pull the trigger to turn on the locator.
STEP 4 OF 5
Click to confirm you've read the manual.
STEP 5 OF 5
Click again to continue.
FIND BEST FREQUENCIES INTRO
You have two options for scanning and pairing with your transmitter.
Basic - Quick Scan Pair (QSP) – At jobsites with minimum interference, bypass
the Frequency Optimizer (FO) to scan and pair band 11.
Advanced - Manual Pick – At jobsites with challenging interference, scan the
jobsite to view the FO and find the spot with the highest noise. You can then
scan and assign band 11.
After using either method to optimize the band, you will pair with the
transmitter and then calibrate.
22
DIGITAL CONTROL, INC