Digital Control DIGITRAK FALCON F1 SINGLEBAND User Manual page 51

STEP 2 OF 5
The number on the screen
*
shows the last target
depth set. If it matches
your desired target depth,
select Target Steering.
The remote screen at the drill will not display Target Steering
until the locator is in Target Steering mode.
STEP 3 OF 5
To change the target depth
shown, use the keypad and
then select Enter to turn
Target Steering on.
Standard HAG is not factored into the target depth setting.
Elevate the locator and add that height to the target depth if
drilling shallower than 1.5 ft (46 cm) or if elevating the locator to
distance it from rebar.
STEP 4 OF 5
Place the locator on the drill path with its battery compartment facing the drill
or transmitter housing. Target Steering guides the transmitter to be inline
with the locator's handle when it reaches the target beneath the locator. For
accurate depth information, use the horizontal distance reading on the
Target Steering display to ensure the locator is no more than 35 ft (10.7 m) in
front of the transmitter.
DIGITAL CONTROL, INC
DIGITRAK FALCON F1 SINGLEBAND USER MANUAL
DCI DigiGuide 05.18.2024
51