Chapter 3: System Setup; Removing The Chassis Bottom Cover - Nexcom IPPC 11-C11 Series User Manual

Chapter 3: System Setup

C 3: s
haPter ystem

Removing the Chassis Bottom Cover

Prior to removing the chassis cover, make sure the unit's power
CAUTION! CAUTION! is off and disconnected from the power sources to prevent
CAUTION!
electric shock or system damage.
1. Locate and remove the 14 mounting screws from the rear panel.
2
Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
1
2
3
The installations shown in this chapter use the IPPC 2411-C11
as an example; the installations for the other models in this
series are the same.
1
2
3
70
IPPC XX11-C11 Series User Manual