User Parameter Tables; Setup Settings: A - Omron VARISPEED L7 Manual

User Parameter Tables

Setup Settings: A

Initialize Mode: A1
Name
Param-
eter
Num-
Display
ber
Language
selection for
Digital Opera-
tor display
A1-00
Select
Language
Parameter
access level
5
A1-01
Access Level
Control method
selection
A1-02
Control Method
Initialize
A1-03
Init Parameters
Password
A1-04
Enter Password
8
5-
Description
Used to select the language dis-
played on the Digital Operator
(JVOP-160-OY only).
0: English
1: Japanese
2: German
3: French
4: Italian
5: Spanish
6: Portuguese
This parameter is not changed by
the initialize operation.
Used to set the parameter access
level (set/read.)
0: Monitoring only (Monitoring
drive mode and setting A1-01
and A1-04.)
1: Used to select user parameters
(Only parameters set in A2-01
to A2-32 can be read and set.)
2: Advanced
(Parameters can be read and set
in both, quick programming
mode (Q) and advanced pro-
gramming mode (A).)
Used to select the control method
for the Inverter
0: V/f control
2: Open loop vector
3: Closed Loop Vector
6: Closed Loop Vector for PM
motors
This parameter is not changed by
the initialize operation.
Used to initialize the parameters
using the specified method.
0: No initializing
1110:Initializes using the user
parameters
2220:Initializes using a two-wire
sequence. (Initializes to the
factory setting.)
Password input when a password
has been set in A1-05.
This function write-protects some
parameters of the initialize mode.
If the password is changed, A1-
01 to A1-03 and A2-01 to A2-32
parameters can no longer be
changed. (Programming mode
parameters can be changed.)
Change
Setting Factory during
Range Setting Opera-
V/f
tion
0 to 6 0 Yes A
0 to 2 2 Yes Q
0 to 6 0 No Q
0 to
0 No A
2220
0 to
0 No A
9999
Control Methods
MEMO-
Closed
Open Closed
BUS
Loop
Loop Loop
Register
Vector
Vector Vector
(PM)
A A A 100H
Q Q Q 101H
Q Q Q 102H
A A A 103H
A A A 104H
Page
–
6-70
6-71
-
-
6-70