Confirmations Upon Delivery; Checks; Nameplate Information - Omron VARISPEED L7 Manual

Confirmations upon Delivery

Checks

Check the following items as soon as the Inverter is delivered.
Item
Has the correct model of Inverter been
delivered?
Is the Inverter damaged in any way?
Are any screws or other components
loose?
In case of any irregularities in the above items, contact the agency from which the Inverter was purchased or
your Omron-Yaskawa Motion Control representative immediately.

Nameplate Information

The nameplate attached to the side of each Inverter showing the model number, specifications, lot number,
serial number and other information about the Inverter.
Example Nameplate
The following nameplate is an example for a standard European Inverter: 3-phase, 400 VAC,
3.7 kW, IEC IP20 standards
Inverter model
Input specification
Output specification
Lot number
Serial number
UL file number
Inverter Model Numbers
The model number of the Inverter on the nameplate indicates the specification, voltage class, and maximum
motor capacity of the Inverter in alphanumeric codes.
Inverter
Varispeed L7
No.
Z
No.
2
4
Table 1.2 Checks
Check the model number on the nameplate on the side of the Inverter.
Inspect the entire exterior of the Inverter to see if there are any scratches or
other damage resulting from shipping.
Use a screwdriver or other tools to check for tightness.
MODEL
CIMR-L7Z43P7
INPUT AC3PH 380-480V 50/60Hz 10.2A
OUTPUT AC3PH 0-480V 0-120Hz 8.5A 3min. 50%ED 8.5kVA
O/N
S/N
FILE NO E131457
YASKAWA ELECTRIC CORPORARION
Fig 1.1 Nameplate
CIMR – L7 Z 2 3P7
Specification
OYMC European Std.
Voltage Class
AC Input, 3-phase, 200 V
AC Input, 3-phase, 400 V
Fig 1.2 Inverter Model Numbers
Method
SPEC: 43P77A
MASS: 4.0 kg
PRG:
M s
MADE IN JAPAN
Max. Motor Capacity
No.
3P7
3.7 kW
5P5
5.5 kW
to to
55 55 kW
"P" Indicates the decimal point.
Inverterspecifications
Mass
1
3
1-