Parameter Descriptions; Description Of Parameter Tables - Omron SYSDRIVE 3G3RV Series User Manual

Parameter Descriptions

This section describes the contents of the parameter tables.
K K K K

Description of Parameter Tables

Parameter tables are structured as shown below. Here, b1-01 (Frequency Reference Selection) is used as an
example.
Param-
eter
Number
Display
Reference
selection
b1-01
Reference
Source
• Parameter Number:
• Name:
• LCD Display:
• Description:
• Setting Range:
• Factory Setting:
• Change during Operation:
• Control Methods:
• Register:
• Page:
-2
5
Name
Description
LCD
Set the frequency reference
input method.
0: Digital Operator
1: Control circuit terminal
(analog input)
2: RS-422A/485 communi-
cations
3: Option Card
4: Pulse train input
The number of the parameter.
The name of the parameter.
The name of the parameter displayed on the LCD-type Digital Opera-
tor.
Details on the function or settings of the parameter.
The setting range for the parameter.
The factory setting (each control method has its own factory setting.
Therefore the factory setting changes when the control method is
changed.)
Refer to page 5-83 for factory settings by control method.
Indicates whether or not the parameter can be changed while the
Inverter is in operation.
Yes: Changes possible during operation.
No: Changes not possible during operation.
Indicates the control methods in which the parameter can be moni-
tored or set.
Q:
A:
No: Items which cannot be monitored or set for the control method.
The register number used for RS-422A/485 communications.
Reference page for more detailed information on the parameter.
Change
during
Setting Factory
Range Setting
Opera-
tion
0 to 4 1 No
Items which can be monitored and set in either quick program-
ming mode or advanced programming mode.
Items which can be monitored and set only in advanced pro-
gramming mode.
Control Methods
V/f Open
Register Page
Loop
V/f with
Vec-
PG
tor
Q Q Q 180H -