User Parameter Manual Setting Function; User Parameter Automatic Setting Function - Omron SYSDRIVE MX2 SERIES User Manual

User Parameter Manual Setting Function

"U" parameters are user parameters, and up to 32 parameters can be registered, as desired.
When user parameters are set and then Display Selection (b037) is set to "02: User setting," only
the functions registered under U001 to U032, d001, F001 and b037 will be displayed thereafter.
Parameter
No.
U001 to
U032
b037

User Parameter Automatic Setting Function

When User Parameter Automatic Setting Function (b039) is set to "01: Enabled," the
parameters subjected to a data change are automatically stored in sequence under U001 to
U032. This data can be used as modification records.
The screen information (parameters) is stored when the Enter key is pressed. The monitor
screens (d***) are also stored in the same manner.
U001 is the latest parameter, while U032 is the oldest parameter.
The same parameter is not duplicated. If the number of parameters stored exceeds 32, the
oldest parameters are erased (from U032).
Parameter
No.
b039
Note: Take note that all parameters that are currently registered in User Parameters (U001 to U032) when
b039 is changed from 00 to 01 will be initialized (set to "no").
SYSDRIVE MX2 Series USER'S MANUAL (3G3MX2-Axxxx)
Function name
User Selection
Display Selection
Function name
User Parameter Automatic Setting
Function
Related functions
5-14 Other Functions
Default
Data
setting
no: Not registered
d001 to P186
Register a desired
function code.
02: User setting + b037
Default
Data
setting
00: Disabled
01: Enabled
U001 to U032
Unit
−
no
−
04
Unit
00 −
5-174
5