User Parameter Descriptions; Description Of User Parameter Tables - Omron VARISPEED E7 User Manual

User Parameter Descriptions

This section describes the contents of the user parameter tables.

Description of User Parameter Tables

User parameter tables are structured as shown below. Here b1-01 (Frequency Reference Selection) is used as
an example.
Param-
eter
Number
Reference selec-
b1-01
tion
• Parameter Number:
• Name:
• Description:
• Setting Range:
• Factory Setting:
• Change during Operation:
• Access Level:
• MEMOBUS Register:
• Page:
5-2
Name Description
Sets the frequency reference
input method.
0: Digital Operator
1: Control circuit terminal (ana-
log input)
2: MEMOBUS communications
3: Option Card
The number of the user parameter.
The name of the user parameter.
Details on the function or settings of the user parameter.
The setting range for the user parameter.
The default setting of the user parameter.
Indicates whether the parameter can be changed while the Inverter is
in operation or not.
Yes: Changes are possible during operation.
No: Changes are not possible during operation.
Indicates the parameter access level in which the parameter can be
changed or monitored.
Q:
A:
The register number used for MEMOBUS communications.
Reference page for more detailed information about the parameter.
Setting Factory
Range Setting
0 to 3 1
Quick programming mode and advanced programming mode.
Advanced programming mode only.
Change
MEMO-
during Access
BUS Reg- Page
Opera- Level
ister
tion
No Q 180H –