Parameter Descriptions; Description Of Parameter Tables - Omron I537-E2-01 User Manual

Parameter Descriptions

This section describes the contents of the parameters tables.
‹

Description of Parameter Tables

Parameters tables are structured as shown below. Here, b1-01 (Frequency Reference Selection) is used as an
example.
Param-
eter
LCD Display
Number
Reference
selection
b1-01
Reference
Source
• Parameter Number:
• Name:
• Description:
• Setting Range:
• Factory Setting:
• Change during Operation:
• Access Level:
• RS-422A/485 Register:
• Page:
-2
5
Name
Description
Set the frequency reference
input method.
0: Digital Operator
1: Control circuit terminal
(analog input)
2: RS-422A/485 communi-
cations
3: Option Card
The number of the parameter.
The name of the parameter.
Details on the function or settings of the parameter.
The setting range for the parameter.
The factory setting.
Indicates whether or not the parameter can be changed while the
Inverter is in operation.
Yes: Changes possible during operation.
No: Changes not possible during operation.
Indicates the access level in which the user parameter can be moni-
tored or set.
Q:
A:
The register number used for R-S422A/485 communications.
Reference page for more detailed information about the parameter.
Change
Setting Factory during
Range Setting Opera-
tion
0 to 3 1 No
Items which can be monitored and set in either quick program-
ming mode or advanced programming mode.
Items which can be monitored and set only in advanced pro-
gramming mode.
RS-422A-
Access
485 Regis- Page
Level
ter
Q 180H -