Displaying User-Set Parameters Only - Omron VARISPEED L7 Manual

Displaying User-set Parameters Only

The A2 parameters (user-set parameters) and A1-01 (parameter access level) can be used to establish a param-
eter set that contains only the most important parameters.
Set the number of the parameter to which should appear in the A2-
The advanced programming mode now allows to read and modify A1-01 to A1-03 and the parameters set in
A2-01 to A2-32 only.
Related Parameters
Parameter
No.
A2-01
to User setting parameters
A2-32
Name
parameters, and then set A1-01 to 1.
Control Methods
Change
Factory
Open
during
Setting
V/f
Operation
Vector
- No A
Closed
Closed
Loop
Loop Loop
Vector
Vector
(PM)
A A
6-
6
71