Specifications - Omron CX-INTEGRATOR - V1.1 Operation Manual

1-2

Specifications

1-2-1 CX-Integrator Specifications
1-2 Specifications
1-2-1 CX-Integrator Specifications
Item
Model Provided in the CX-One FA Integrated Tool Package (CXONE-AL@@C-E).
Setup media CD-ROM
Applicable Computer IBM PC/AT or compatible
computers
CPU Pentium II, 333 MHz or better, for Windows 98 SE or NT 4.0 with service pack 6a Pentium III, 1
(with
GHz or better, is recommended.
FinsGateway)
OS Microsoft Windows 98 SE, Me, 2000, or XP
Microsoft Windows NT version 4.0 service pack 6a
Note: CX-Integrator cannot be used with Windows 95.
Memory 64 MB min. for Windows 98 SE or NT 4.0 with service pack 6a
Hard disk 100 MB min. of available space
drive
Monitor SVGA, 800 x 600 pixels or better
Note: Use the small font size.
CD-ROM At least one required.
drive
Communi At least one RS-232C or USB port (See note.)
cations Note:
port
PLCs that can be used
as relay PLC for online
connections
CS Series
Note: A relay PLC is the
PLC to which the
CX-Integrator is
connected online.
CJ Series
CP-Series
(See note 3.)
NSJ Series
1-8
The USB port on a computer can be connected to if the CJ1W-CIF31 USB-Serial
Conversion Cable is used. (The driver software included with the CJ1W-CIF31 must be installed
on the computer.)
Series Device type
(See note 1.)
CS1H
CS1G/CJ1G CS1G-CPU45/44/43/42(-V1)
CS1G-H
CS1H-H
CS1D-H
CS1D-S
CS1G/CJ1G CJ1G-CPU45/44
CJ1M
CJ1G-H
CJ1H-H
CP1H-XA
CP1H-X
NSJ
Note 1: To connect the computer running CX-Integrator directly as a CompoWay/F slave, set
the Device type to CompoWay/F Device.
Note 2: When using a pre-Ver. 1.1 CS1D-H CPU Unit, use it as if it were a CS1H-H CPU
Unit.
Note 3: Use commercially available USB cable (B type to A type connectors) for connecting
CP-series CPU Units.
Specification
CPU Unit model
CS1H-CPU67/66/65/64/63(-V1)
CS1G-CPU45H/44H/43H/42H
CS1H-CPU67H/66H/65H/64H/63H
CS1D-CPU67H/65H (See note 2.)
CS1D-CPU67S/65S/44S/42S
CJ1M-CPU23/22/21/13/12/11
CJ1G- CPU45H/44H/43H/42H
CJ1H-CPU67H/66H/65H
CP1H-XA@@@@-@
CP1H-X@@@@-@
G5D (Used for the NSJ5-TQ0@-G5D, NSJ5-SQ0@-G5D,
NSJ8-TV0@-G5D, NSJ10-TV0@-G5D, and NSJ12-TS0@-G5D.)