Omron CX-INTEGRATOR - V1.1 Operation Manual page 125

3-1 Routing Table Overview
3-1-5 Operating Procedures Prior to Routing Table Transfer
3-1-5 Operating Procedures Prior to Routing Table Transfer
This section describes the operating procedures necessary to create the routing tables
for the first time up to the point where the files are transferred to the PLCs.
Note
When configuring the network, connect the CX-Integrator directly to each node (CPU
Unit) that will participate in the network and set the routing tables (FINS local routing
tables).
Network Configuration Procedures
Creating the FINS Local Routing Tables Online
Connect online with the PLC directly connected to the CX-Integrator.
Select Network – Auto Online or Network – Work Online from the CX-Integrator's menu bar.
Start the Routing Table Component. (Start the PLC routing table.)
Right-click the Communications Unit or Port in the Online Connection Information Window select Start Routing Table from
the popup menu, or select Tools - Start Routing Table from the CX-Integrator's menu bar.
Create the FINS local routing tables (in the PLC routing tables).
Create the local network table.
Create the relay network table.
Set the gateway counter. (CS/CJ-series CPU Units must be unit version 3.0 or later.)
Click the SIOU Tab when the PLC routing tables are displayed, right-click the local PLC's icon, and select Set Gateway
Counter from the menu.
Check the routing tables for errors.
Select Options – Check Routing Table for errors from the PLC routing table menu.
Transfer the routing tables to the PLC (from the computer to the directly connected PLC).
Select Options – Transfer to PLC from the PLC routing table menu.
Save the created routing tables.
Select File – Save Local Routing Table File from the PLC routing table menu.
Update the display in the Online Connection Information Window.
In the Online Connection Information Window, select View – Update of Online Information Window .
3-6