Omron CX-INTEGRATOR - V1.1 Operation Manual page 281

7-2 CompoWay/F Slaves Connected to a PLC
7-2-1 Communications with CompoWay/F Slaves through a PLC
Uploading the CompoWay/F Network Configuration
1. With the CX-Integrator online, right-click the Serial Communications Unit under the
target PLC in the Online Connection Information Window and select Connect.
2. A dialog box will be displayed to select one of the Serial Communications Unit's
serial ports. Select PORT1 (RS-422A/RS-485 port) and click the OK Button.
3. A dialog box will be displayed to select the communications protocol.
Select CompoWayF as the Port 1 (RS-422A/RS-485 port) protocol and click the
OK Button.
Note: The CompoWay/F protocol communications will be enabled when CompoWayF is
4. The
that the Serial Communications Unit's serial port (port 1) can be accessed through
CompoWay/F protocol communications.
7-4
selected in the dialog box above and Serial Gateway is selected for port 1 in the
Serial Communications Unit's Unit parameters.
icon will be displayed next to the Serial Communications Unit to indicate