Omron CX-INTEGRATOR - V1.1 Operation Manual page 133

3-2 Setting the Routing Tables
3-2-2 Creating the FINS Local Routing Tables
Note
The serial port's CPU SIOU value (unit number) is allocated automatically, so it cannot
be changed. The following FINS unit addresses (decimal) are allocated.
Serial Communications Unit
Serial Communications Board
CPU Unit
A Unit and the Unit's serial port cannot be registered in the local network table at the
same time.
Setting the Relay Network Table Online
Set the relay network table for PLC1 online.
1. Click the Table View Tab at the bottom of the PLC Routing Table Window to switch
to the Table View format.
2. Input the destination (remote) network address, relay network address, and relay
3-14
node address and click the OK Button.
80 hex + 04 hex ×
Serial port 1
unit number
81 hex + 04 hex ×
Serial port 2
unit number
Serial port 1 E4 hex (228 decimal)
Serial port 2 E5 hex (229 decimal)
Peripheral port FD hex (253 decimal)
RS-232C port FC hex (252 decimal)