Omron CX-INTEGRATOR - V1.1 Operation Manual page 74

2-1 Basic Procedures
Designing DeviceNet and CompoWay/F Networks Offline
Networks can be designed on the CX-Integrator even before they have been installed.
Parameters for individual DeviceNet masters and slaves can be set.
Parameters for individual CompoWay/F slaves can be set.
The specified parameters can be saved in project files.
All DeviceNet device and CompoWay/F component properties are included in the
project file (.cin).
Overall Procedure
Start the CX-Integrator.
● DeviceNet Networks ● CompoWay/F Networks
Add CompoWay/F slaves to the virtual network.
Add devices to the virtual network.
Set CompoWay/F slave parameters.
Set slave parameters for slaves that require
setting.
Register slaves in the master.
Set master parameters.
Save everything in the project file (.cin).
2-7