Omron CX-INTEGRATOR - V1.1 Operation Manual page 142

3-2-6 Saving Routing Tables
Use the following procedure to save the created FINS local routing tables. The FINS
local routing tables are saved in a file with the ".rtg" filename extension.
1. Select File – Save Local Routing Table File in the PLC Routing Table Window.
The Save As Dialog Box will be displayed.
2. Input the desired filename ("Sample" is input in this example), specify the directory
where the file will be saved, and click the Save Button.
The file will be saved with the ".rtg" filename extension attached ("Sample.rtg" in
this example).
3-2-7 Reading Routing Tables
Use the following procedure to read FINS local routing tables that were previously
saved.
1. Select File – Open Local Routing Table File in the PLC Routing Table Window.
The Open Dialog Box will be displayed.
2. Select a FINS local routing table file (.rtg) and click the Open Button.
The FINS local routing tables will be read.
Once the file is read, the PLC can be connected online and the file can be
transferred to the PLC.
3-2-8 Verifying Routing Tables
Use the following procedure to compare routing tables created in the CX-Integrator to
the routing tables in the PLC.
1. Select Options – Verify Routing Table in the PLC Routing Table Window.
The results of the verification will be displayed.
Click the OK Button to display detailed verification results.
Normal Result
Local Network Table Results
3-2 Setting the Routing Tables
3-2-6 Saving Routing Tables
Error Detected
Relay Network Table Results
3-23