Omron CX-INTEGRATOR - V1.1 Operation Manual page 181

4-3 Manually Setting Data Links
4-3-11 Transferring the Data Link Table
4-3-11 Transferring the Data Link Table
There are two methods that can be used to transfer data link tables.
• Transfer data link tables to all PLC nodes on the network at the same time.
• Transfer data link tables to all PLC nodes on the network at the same time.
Transferring to All Nodes on the Network
1 Select Set All Nodes for Network Operation from the Datalink Component's
Online Menu. Selecting this operation allows the data link tables to be transferred
simultaneously to multiple PLCs.
2 Select Online - Transfer to PLC. The following dialog box will be displayed.
3 Click the Yes Button.
An error list will be displayed.
4 If there are no errors, click the OK Button. The data link tables will be transferred to
all PLC nodes and then the transfer results will be displayed.
4-34
Confirm that there is a
check mark.