Omron CX-INTEGRATOR - V1.1 Operation Manual page 57

Main
Sub-menu/command
menu
Compo- IO table
nent
Error Log
Mode Setting
Maintenance information
Status/Error of Communication Unit
Error Log of Communication Unit
Resister to
another device
Change Node address
I/O Comment
Edit Device Comment
Tools Start Data Link
Start Routing Table
NT Link tool
DeviceNet
tool
Controller
Link tool
Ethernet tool
Echoback
test between
PLC nodes
CPS file
EDS file
Starts the I/O Table Component
online.
Display the CPU Unit error log
online.
Reads or changes the CPU Unit's
operating mode online.
Displays the maintenance
information of the selected
component.
Displays the status and error
information on a Communications
Unit online.
Displays the error log of a
Communications Unit online.
No applicable Registers the current device to the
devices scan list in another device.
Changes the node address of a
component.
Enables editing the comments of a
DeviceNet device (component).
Enables changing the comment of
a component.
Starts the Data Link Component.
Starts the Routing Table
Component.
Auto online setting Automatically detects an
NS-series PT connected serially
via an NT Link to a CS/CJ-series
PLC.
Generic parameter Sends an explicit message.
setting
Edit Configuration Edits each settings file.
file
Edit configuration
Edits a variety of setting files.
file
Install of plugin Enables installing a plug-in
module module.
Setup monitor Set the monitor refresh timer for
refresh timer the device monitor window.
Parameter auto Enables automatically updating
update when I/O the slave I/O size registered in the
size changed scan list in the master when a
slave I/O size is changed. The
default setting is OFF (not
automatically updated). Normally,
leave this function set to OFF.
Network Diagnosis Starts the Controller Link Network
Diagnosis Tool.
Ping test Starts the Ethernet ping test tool.
Broadcast node Uses IP broadcast to search for
search nodes on Ethernet.
Starts the echoback test tool for
checking the communications
status of the network.
Install CPS Installs a CPS file on the computer
and adds the component to the
CPS list.
Install EDS Installs an EDS file on the
computer and adds the device to
the EDS list.
Create Creates a new EDS file on the
computer and adds the device to
the EDS list.
Delete Deletes an EDS file from the EDS
list.
Save Saves an EDS file from the EDS
list in a file with a different name.
Description
All networks
DeviceNet
only
All networks
DeviceNet
only
All networks
DeviceNet
only
DeviceNet
only
All networks
NT Link only
DeviceNet
only
DeviceNet
only
DeviceNet
only
DeviceNet
only
DeviceNet
only
DeviceNet
only
All networks
Ethernet only
All networks
DeviceNet
only
DeviceNet
only
DeviceNet
only
DeviceNet
only
1-6
1-6-1
Network
Offline Online
type
No OK
No OK
No OK
No OK
No OK
No OK
OK No
OK No
OK No
OK No
OK OK
OK OK
No OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
No OK
No OK
OK OK
No OK
OK OK
OK OK
OK OK
OK OK
OK OK
Menus
Menus
1-37