Omron CX-INTEGRATOR - V1.1 Operation Manual page 92

2-3 Uploading Network Configurations and Checking for Communications
4. The network configuration uploaded from the Unit will be displayed in the Network
Configuration Window.
5. Check the connection status of the nodes. To check the CPU Unit and
Communications Units for errors, right-click the node in the Network Configuration
Window and select Error Log or Status/Error of Communication Unit from the
pop-up menu.
2-3-3
Checking and Correcting Communications Unit Errors
Checking a Communications Unit's Status and Errors
Right-click the target PLC in the Network Configuration Window and select
Status/Error of Communication Unit from the pop-up menu.
The PLC Unit Status Dialog Box will be displayed. In this example, a Controller Link
Unit is selected.
Note: The Communications Unit's status and error information can be saved as a CSV file by
2-3-3 Checking and Correcting Communications Unit Errors
The target PLC is displayed
with a green border.
clicking the Save Button, so the Communications Unit's status at that point can be read
from the CSV file later and analyzed.
Unit Errors
The window
background will be
gray when online.
2-25