Omron CX-INTEGRATOR - V1.1 Operation Manual page 124

3-1-3 Routing Table File Types Supported by the CX-Integrator
The CX-Integrator supports the following two kinds of routing table files.
FINS local routing
table files
FINS network
routing table files
Note
When connecting online through Ethernet, the FINS network routing table cannot be
set or transferred if there is even one node in the network that does not automatically
generate an Ethernet IP address from the FINS node address. Be sure that all of the
nodes will automatically generate IP addresses when using Ethernet.
3-1-4 Starting the Routing Table Component
The Routing Table Component can be started with either of the following methods.
Method 1:
While online, right-click the Communications Unit or Port in the Online Connection
Information Window select Start Routing Table from the popup menu.
Method 2:
While offline, select Tools - Start Routing Table from the menu bar.
Method 3:
While online, right-click the target PLC in the Online Connection Information Window
select Start Routing Table from the popup menu.
3-1-3 Routing Table File Types Supported by the CX-Integrator
File type
Create or edit the routing table for the PLC connected
directly to the CX-Integrator. Create the file for the network
structure, read the created files, and transfer them to the
directly connected PLC.
These files are used when the network starts.
Note: It is also possible to read routing table files (*.rtg)
created with Support Software such as SYSMAC
Support Software, CV Support Software, and
Controller Link Support Software.
Create or edit routing tables for all of the PLCs in the
network containing the PLC connected directly to the
CX-Integrator.
After configuring the network (transferring the routing table
to each node, connecting to the network, and completing
settings), the routing tables can be read through the
network and edited to create the FINS network routing
table file.
These files are used for maintenance after the network is
configured.
3-1 Routing Table Overview
Functions
File name
extension
.rtg
.rt3
3-5