Omron CX-INTEGRATOR - V1.1 Operation Manual page 63

Sub-menu/command
Reset
Maintenance information
Resister to another device
Export
Comment list
NX-Server DDE
Setup File
NX-Server ONC
Setup File
ONC DRM Unit
Setup File
Cut
Copy
Paste
Delete
Change Node Address
Change Device Comment
I/O Comment
Start Special Start with
Application Settings
Inherited
Start Only
Properties
Description
Resets a device on the network.
Displays the maintenance information for the
selected device.
Registers the current device to the scan list in
another device.
Exports I/O comments in CSV format
(supported devices only).
Scan list information is output in the
NX-Server DDE Edition file format.
Scan list information is output in the
NX-Server ONC Edition file format.
Scan list information is output in the ONC
Master parameter file format.
Cuts the selected device.
Copies the selected device.
Pastes the device on the clipboard.
Deletes the selected device.
Changes the selected device's node address. OK
Changes the selected device's description
(comment).
Enables editing I/O comments.
Starts the associated application while
keeping the PLC model settings.
Starts the associated application.
Displays the properties of the device.
1-6 Menus
1-6-2 Pop-up Menus
Offline Online
No OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK No
OK No
OK No
OK No
No
OK No
OK No
OK OK
OK OK
OK OK
1-43