Omron CX-INTEGRATOR - V1.1 Operation Manual page 49

Workspace Window
The Workspace Window lists the networks displayed in the Network Configuration Window.
Workspace Window
The icon to the left of the network that is currently connected and can be accessed will be
either
accessed at any one time.) To enable accessing a network, right-click on it and select
Connect. The actual communications configuration can then be uploaded by right-clicking
the Communications Unit/port and selecting Transfer − Network to PC. To compare the
actual communications configuration with that on the CX-Integrator, right-click the
Communications Unit/port and select Compare.
Note: The Workspace Window corresponds 1:1 to the Network Configuration Window.
If the Network Configuration Window is closed, double-click on a network in the Workspace
Window, and the communications configuration of that network will be displayed in the Network
Configuration Window.
Note Accessible Status for Networks
The following status is possible for a network displayed in the Workspace Window.
Display in
Workspace
Window
Project name
or With the CX-Integrator, only one Communications Unit/port can be
Status
Accessible network
Inaccessible networks
1-5
List of networks displayed in
Network Configuration Window
Network address (3 digits following #)
Network type
Network name
Operation
Right-click the network and
select Connect.
Networks created offline
or networks for which the
communications
configuration has been
uploaded and then the
connection was changed to
a different network by
right-clicking and selecting
Connect.
Window Descriptions
1-5-2 Main Window
Remarks
Only one network can be
accessed at any one time.
Network configurations can
be uploaded or compared
only for a network in this
status.
Note: Access is possible to a
network only when it is
connected.
Note: Access is not possible
to a network that is not
connected.
1-29