Omron CX-INTEGRATOR - V1.1 Operation Manual page 134

3. When the relay network table is set in the PLC Routing Table Window, the display
automatically changes to the Main View format.
Local node's
unit number: 0
Note
The relay network table can also be set using the following procedure.
1. Click the Main View Tab and select Edit – Add Remote Network.
2. The Enter SIOU Details Dialog Box will be displayed.
Input the CPU SIOU (unit number) and local network address.
The relay network table will be added to the PLC Routing Table (Main View).
3-2 Setting the Routing Tables
3-2-2 Creating the FINS Local Routing Tables
Relay node address: 3
Destination network address: 2
Local network address: 1
Input the relay node
address.
Input the remote
network address.
3-15