Omron CX-INTEGRATOR - V1.1 Operation Manual page 286

Note When a K3SC Serial Converter is connected to the PLC's RS-232C port and a
Temperature Controller is connected to the K3SC by RS-485, make an RS-232C cable
with the following wiring to connect the PLC's RS-232C port to the K32-23209
Attachment Adapter.
Input Power
Procedure for Smart Sensors
1. Right-click Smart Sensor in the Network Configuration Window and select
Parameter – Edit.
2. The Edit Parameters Dialog Box will be displayed.
After setting the parameters, select Transfer [PC to Unit] to download the settings
to the Smart Sensor.
7-2 CompoWay/F Slaves Connected to a PLC
7-2-2 Setting the CompoWay/F Slave's Parameters
Temperature Controller
RS-485
RS-232C Cable
Attachment
adapter
K32-23209
To attachment adapter
Signal Pin No.
RD 2
SD 3
ER 4
SG 5
DR 6
RS 7
CS 8
FG -
CS/CJ Series PLC
RS-232C Port
To PLC
Signal Pin No.
2 SD
3 RD
4 RS
5 CS
7 DR
8 ER
9 SG
- FG
7-9