Omron CX-INTEGRATOR - V1.1 Operation Manual page 41

1-4-2 Direct Connections to a Relay PLC via a Network
When connecting the computer running the CX-Integrator directly to the relay PLC via a
network, make the connection correctly using the following connection diagrams.
Ethernet
Controller Link or SYSMAC LINK
Note:
Optical ring with H-PCF cable
Optical ring with GI cable
Wired (twisted-pair cable)
1-4-2
CS/CJ-series
Ethernet Unit
Ethernet port
Ethernet
CS/CJ-series
Controller Link Unit
PCI Controller Link Support Board
(See note.)
Controller Link
Type
1-4
Direct Connections to a Relay PLC via a Network
CS/CJ-series
relay PLC
DeviceNet network
CS/CJ-series
relay PLC
DeviceNet network
Board
Controller Link PCI-bus
Support Board
PLC Connecting Cables
Model
3G8F7-CLK12-V1
3G8F7-CLK52-V1
3G8F7-CLK21-V1
1-21